Be Cool pivot, Manual

Page: 59 / 144

EN
59
3. This device is intended for the following ISOFIX weight
group and size class: group I, 9-18 kg, ISOFIX B1.
WARNING
1. This is a child safety seat. It is approved under Regu-
lation No. 44, 04 series of amendments for general use
in various vehicles. It is suitable for use in most, but not
all, vehicles.
2. If the vehicle manufacturer has stated in the corre-
sponding manual that a “Universal” child safety seat for
this age group is suitable for use in the vehicle, the seat
can probably be installed correctly.
3. This child safety seat has been classified as “Univer -
sal” under more stringent conditions than those which
applied to earlier designed that do not carry this notice.
4. If in doubt, consult either the safety seat manufacturer
or the retailer.
Vehicle fitted with ISOFIX anchors.
WARNING: Do not use the seat in the forward
facing position until the child weighs over 9 kg.
C- SEMI-UNIVERSAL ll+lll (15-36 kg):
3-POINT SEAT BELT
This child safety seat is intended for one use (semi-uni-
versal) and is suitable for installation on the following
vehicle seats:
VEHICLE FRONT BACK
(Suitable for all Exterior seat Exterior seat Centre
vehicles with NO YES ?
ISOFIX anchors)
Other positions on the vehicle seats may also be suitable
for this child safety seat. If in doubt, consult either the
safety seat manufacturer or the retailer.
This seat is only suitable for use in vehicles fitted
with ISOFIX anchors and 3-point seat belts.
This seat is only suitable for use in vehicles fitted
with 3-point seat belts/with retractor, approved
under ECE regulation No. 16.
Vehicle fitted with ISOFIX anchors.