38
Completely remove the gaiter from
the hand.
Note the thumb cable position, as this is key when
refitting a new gaiter.
7.
8.
6.1.2 Gaitor Refitting
1.
2.
3.
4.
Slide the thumb section of the gaiter over the thumb.
Ensure the gaiter strap is under the thumb. Pay special
attention to the thumb cable position.
Ensure the thumb section of the gaiter is pushed all the
way to the gap shown in the image above.
Pull the gaiter strap around to the rear of the hand and
up over the EQD.
Line up the sections of the hand highlighted with the
sections of the gaiter when pushing the gaiter flaps
under the rear cover. Pay special attention to the thumb
cable position.
