CAR-TMXXXX USER MANUAL
3
The presence of this symbol of danger in the manual points out important instructions
concerning safety. It is first of all meant for the operator. The operator shall comply with the
compliance with the warning contained in the message by himself but also by other people
exposed to the machine risks. Lack of compliance with the instructions can cause damage
to people which could sometimes even be cause of death.
This “instruction” symbol in the manual points out important instructions concerning the
correct start-up, operation and in general conditions which could jeopardize the life of the
product.
FOREWORD
CARONI SPA would like to thank you for your preference in choosing our quality machines.
Aiming at obtain the longest possible efficiency of the machines, you have purchased, we kindly invite
you to read and thoroughly understand the instructions for use and maintenance in this manual. A careful
compliance with these instructions permits to prevent troubles and accidents or injuries caused by
carelessness or lack of compliance with the safety standards and in that case our company shall not be held
liable.
This manual complies with the requirements of the machine directive 98/37/EC. This manual is integral with
the machine and shall therefore accompany the machine should it be sold to a new user.
i
The instructions contained in this manual should be read carefully before carrying out any operation with
and on the machine, in order to work in safety and preserving its correct operation.
Apart from the main technical and safety features of the machines, the manufacturer reserves the right of
carrying out modifications to the machine at any time for reasons of ongoing technical and technological
evolution without having to be fined for that.
Furthermore, we stress the fact that the only expected use of this machine is the one described in the
manual, any other application is forbidden.
MARKING AND IDENTIFICATION
MARKING
Each machine bears the EC identification label (for its position see fig. 4). Which contains not only the EC
mark but also the following data:
A – Manufacturer logo
B – Model
C – Serial number
D – Year of manufacture
E – EC mark of conformity
F – Mass in kg
