OPERATING INSTRUCTIONS (CONT.)
57GUNMOD
c) Press two buttons at the same time to select decimal digits of actual oil amount delivered
(Max: 3 decimal digits), Picture 4.
d) Then press two keys at the same time to set factor, Picture 6.
3. Press the Reset button (not for long, press the Reset button to prevent the current oil reset), as shown
in Picture 3, press the Reset button, Picture 4 will appear, then press again the Reset button, the screen will
show Picture 5, keep pressing the Reset button until Picture 6 appears.
Picture 4: Decimal digits display.
Picture 5: Clear total amount display.
Picture 6: Factor display. The 002500 is actual oil amount delivered. The factor will be changed automatically
when inputting actual oil amount delivered.
4. Required oil until, press the Total button, the first digit flicker and then determined by Total, so the number
third is back, until a bit “0” digital flicker, press Reset key, the digits change until the required oil, press Total
to confirm and lead to the next digit and so on. (Small digital display parameters is changed with above
injection quantity change). After, If you do not need to change other values, as shown in Picture 7, then
press Reset to switch to the next, until the screen shows Picture 8 & 9 and save settings.
Note
: In above correction parameters, press Total, the bottom of the cumulative and instantaneous mutual switch,
Reset: clear the current amount.
Back to start running state. According to the oil injection method, the vector cup must reach certain value of oil
(such as 3L), then the screen will appear on the corresponding value of a cup of oil filling, if the difference is large,
according to the above method and then set the operation time, until the oil and numerical display can be
quite similar.
