background image

This product consist of oil gun, digital meter, inlet oil hose, cam measure (low, medium and high viscosity), 

liquid and non flammable fuel accurately. These include lubrication oil, antifreeze liquid and other liquids. 

The electronic system of microprocessor have function with display control and calibration. This kind of oil 

meter gun is an integration of oval gear flow meter with high precision. 

a) The measurement accuracy up to ±0.3%

b) The power consumption is extremely low, it will become power down mode if it does not work.

c) It has fixed memory to save total oil amount data, it can preserve the total amount and primary parameters 

     even if the power interrupts completely long time.

d) Set parameter by user, more convenient operation.

INTRODUCTION

PRODUCT CHARACTERISTICS

a) Flow range: 2-35L/min

b) Working Pressure:0.05-0.7Mp

c) Inlet and outlet joint: 1/2” Bsp

d) Medium Viscosity: 10-5000 MP

e) Operating temperature: (-5°C - 60°C)

f) Unit: Liters, Quarts, Pints & Gallons

TECHNICAL PARAMETER

1. Meter appearance

2. Four indicate unit: L, PT, QT as well as GAL

3. Reset key: Starting or Clear

4. Total key: Display the total

5. Display signals of low power

6. The screen

OIL METER STRUCTURE

57GUNMOD

Summary of Contents for 57GUNMOD












Reviews: