16
Troubleshooting
AirMAB 5000
GB
Storage
If you do not intend to use the machine for a longer period of time,
clean it as described in the section
Cleaning
. Store the machine and all its accessories in
the transport case at a dry, clean and frost-free location.
Troubleshooting
Fault
Possible cause
Remedy
The motor does not start after
pressing the ON/OFF switch
or stops during operation.
Compressed air supply not
connected.
Connect the
compressed air supply .
Compressed air supply not
switched on.
Switch on the compressed air
supply.
Compressed air supply not
sufficient.
Check the compressed air
supply and set up according
to specifications.
The magnetic clamp does not
function.
Magnet not switched on.
Switch on magnet.
The surface is not magnetic.
Use a suitable base.
Tools wear excessively/are
damaged.
No lubrication or not suffi
-
ciently greased.
Supply lubrication
(e.g.,:use pump bottle for cut-
ting oil/drilling emulsion (21)).
NOTE
If you cannot resolve the problem with the steps described above, please contact
►
customer service.
