BD FocalPoint GS User Manual Download Page 13

Page: 13 / 242

Introduction

1.4

Document Conventions

There are five notice types used in this manual: three warnings, a

caution, and a note. The appearance and usage of each type is detailed below:

WARNING

INDICATES THE POSSIBILITY OF SEVERE PERSONAL INJURY

OR LOSS OF LIFE IF INSTRUCTIONS ARE NOT FOLLOWED.

WARNING

INDICATES THE POSSIBILITY OF SHOCK AND FIRE

POTENTIAL IF INSTRUCTIONS ARE NOT FOLLOWED.

WARNING

INDICATES THE POSSIBILITY OF POTENTIAL EXPOSURE TO

BLOOD AND OTHER POTENTIALLY INFECTIOUS BODILY

FLUIDS IF INSTRUCTIONS ARE NOT FOLLOWED.

CAUTION

Indicates the possibility of severe equipment damage or invalid

results if instructions are not followed.

NOTE

Take care to pick up the slide by the edges, so that fingerprints do

not get on top of the coverslip.

Summary of Contents for FocalPoint GS



















































































































































































































































Search results

Summary of Contents for FocalPoint GS

Reviews:

BD FocalPoint GS, User Manual, Page: 13 / 242

Search results

Summary of Contents for FocalPoint GS

Reviews: