22 September 2015
TorqLoc
#
1030395
BD Engine Brake Inc.
Plant Address: 33541 MacLure Rd. Abbotsford, BC, Canada V2S 7W2
U.S. Shipping Address: 88-446 Harrison St, Sumas, WA 98295 U.S. Mailing Address: P.O. Box 231, Sumas, WA 98295
Phone: 604-853-6096 | Fax: 604-853-8749 | Internet: www.bd-power.com
12
Dodge “TRANS” Relay Bypass (1996-2000)
Remove the cover on the Power Distribution Center (PDC) box, behind the driver's
side battery. Replace the "TRANS" relay (see diagrams below, or bottom of PDC
cover) with Copper Jumper.
This is not required on 1999-up California model trucks
.
Some trucks may set various transmission codes once the Torqloc is installed. If the
Engine Service Light comes on after operation, try reinstalling the relay, then clear
the fault code from the ECM.
2001-up:
These vehicles USUALLY do not require the relay to be removed and
have the jumper wire installed. Please test the installation with the factory relay
installed. If any symptoms occur, remove the relay and install the jumper wire.