BCS 770HY Two Wheel Tractor Power Unit
Page 16
TWT770HY/PU/0221
Before starting the engine ensure the gear lever
(fig. 2,
D) is in neutral position and the power take-off (PTO)
lever is disengaged
(fig. 2, E).
Using the dipstick provided
(fig. 2b, 22)
, check the
engine oil level.
Top up with 10w/40 oil if necessary.
Check the gear oil level (see service information on
page 20 for more details).
Check fuel level.
Only use diesel from a clean container.
Never re-fuel when the engine is hot or running.
Leave 1” air space in the fuel tank.
Make sure the fuel cock is in the ON position
(fig. 6a, 1).
Turn the engine speed control lever
(fig. 6b, 1)
to the
RUN position
(fig. 6b, 2).
IMPORTANT!
Every 30-40 days start the
engine and let it run for a few minutes to keep
the injector and the pump operating, and to
prevent it from sticking.
For recoil-start engines:
Push the decompression lever on top of the engine
(fig.
6c, 1) and release it.
The lever will automatically return to the original
position when the engine starts.
Grasp the recoil starter handle
(fig. 6d, 1).
Pull the handle all the way out with a strong and even
motion, use two hands if necessary.
Slowly return the recoil starter handle to the initial
position.
If the engine does not start, repeat this procedure again.
1
Fig. 6c
2
Fig. 6b
1
To Start the Machine
(Yanmar Diesel Engine)
1
Fig. 6a
Fig. 6d
1