OPERATING INSTRUCTIONS
There are two methods of operating this heater: pressing the heater button or setting temperature.
1.
Press the heater button to turn on heat. Press once for low heat (one sun) and twice for high heat (two suns).
2.
Press the increase/decrease temperature buttons to set a desired temperature. Temperature can be set
from 50°F to 95°F. The heater will alternate between low heat, high heat, and fan until room
temperature reaches the desired temperature.
•
Heater will operate in low heat if set temperature is 3 to 4 degrees higher than room temperature.
•
Heater will operate at high heat if set temperature is 7 to 8 degrees higher than room temperature.
•
Once desired temperature is reached, heater will cycle between fan and low heat to
maintain temperature.
CLEANING & STORAGE
•
Turn off and unplug the appliance before cleaning or storage. Allow unit to cool completely.
•
It is very common for dust to gather in the inlet/outlet and cause overheating. Routinely clean the
housing and openings with a slightly damp cloth, vacuum cleaner, or dusting brush.
•
Do not attempt to disassemble the heater.
•
Do not clean with gasoline, benzine, thinner, or harsh cleaners.
•
For prolonged storage, cover heater and store in a cool, dry place away from direct sunlight and dirt.
|
7
