background image

TOOLS REQUIRED

HARDWARE

2 AAA BATTERIES

(PROVIDED)

+

  

AAA

  

-

ALLEN WRENCH

(PROVIDED)

MULTIFUNCTION TOOL 

(PROVIDED)

3

2 PCS

M8 x 35mm 

BOLT SET 

4

8 PCS

M8 x 16mm 

SCREW

2

2 PCS

M8 x 60mm 

BOLT SET

1

4 PCS

M8 x 62mm 

BOLT SET 

APPROXIMATELY

30 MIN.

ASSEMBLY

1 PERSON

ASSEMBLY

220 LBS

CAPACITY

LBS

 Please read the manual carefully before beginning to exercise.

 Firmly secure all screws before use.

 Product is intended for indoor use only.

 This appliance is not intended for use by persons (including children) with reduced physical, sensory or 

mental capabilities, or lack of experience and knowledge, unless they have been given supervision or 

instruction concerning use of the appliance by a person responsible for their safety.

 If any parts are missing, broken, damaged, or worn, stop using this item until repairs are made and/or 

factory replacement parts are installed.

 Do not use this item in a way inconsistent with the manufacturer’s instructions as this could void the 

product warranty.

NOTICE

Please retain these instructions for future reference.

CAUTION DURING USE

 Use machine on a stable and level surface.

 Do not use outdoors, near water, or in places with excessive noise.

 Do not use near heat sources like a heater/fireplace or in enclosed spaces without proper air circulation.

 Do not use near sharp or dangerous objects.

 Before beginning any exercise, consult with your doctor to ensure do not have any medical or physical 

conditions that could put your health and safety at risk. This consultation is essential if you are taking 

medication that affects your heart rate, blood pressure, or cholesterol level.

 Beware of your body’s signals, as incorrect or excessive exercise can damage your health. 

Stop your workout and consult with your doctor immediately if you experience any of the following: 

dizziness, nausea, chest pain, back pain, or any other health-related symptoms.

 Routinely inspect your machine periodically to ensure all nuts and bolts are securely tightened and that 

your machine is in good condition.

 This machine is designed for adult use only and is not suitable for therapeutic use. 

 Keep children and pets away from the equipment.

 Always ease into working out and warm up before every exercise.

 Wear appropriate clothing while working out; do not wear a robe or any other clothing that could 

become caught in the machine. 

 Wear running or aerobic shoes when exercising. 

 Keep hands away from all moving parts. Always be sure to lift or move the equipment carefully.

 Do not use any accessory or fitting other than original accessories and fittings.

Summary of Contents for SKY3023













Reviews: