60
•
I/O Devices Configuration
Press <Enter> to enter the sub-menu and the following screen appears:
•
OnBoard Floppy Controller
Enable/ disable the onboard floppy controller.
•
COM Port 1
Set the serial COM port #1 base address and IRQ.
•
COM Port 1 Type
Set the COM port #1 in the mode of “RS232”, “RS422”, or “RS485”.
•
IRDA Support
Enable/ disable the IrDA port.
•
IR Duplex Mode
Select the “Full Duplex” or ”Half Duplex” for IR Duplex mode.
•
COM Port 2
Set the base address for serial COM port #2.
•
COM Port 2 IRQ
Set the IRQ for serial COM port #2.
