50
•
IDE Primary/ Secondary Master/Salave, IDE Third/ Fourth Master.
Press <Enter> to enter the sub-menu, and the following screen appears:
•
IDE Primary/ Secondary Master/ Slave, IDE Third/Fourth Master are appearing
when you connect the HDD to the SATA connector on the mainboard. For
instance, the HDD connected to SATA1 header will be identified as Primary IDE
Master; the HDD connected to SATA4 header will be connected identified as
Secondary IDE Slave, and so on.
•
Device/ Vendor/ Size
It will showing the device information that you connected to the SATA connector.
•
LBA/ Large Mode
This allows you to enable or disable the LBA Mode. Setting to Auto enables LBA mode if the
device supports it and the devices is not already formatted with LBA mode disabled.
•
DMA Mode
Select
DMA
Mode.
•
Hard Disk S.M.A.R.T.
This allows you to activate the S.M.A.R.T. (Self-Monitoring Analysis & Reporting Technology)
Capability for the hard disks. S.M.A.R.T. is a utility that monitors your disk status to predict hard disk
failure. This gives you an opportunity to move data from a hard disk that is going to fail to a safe place
before the hard disk becomes offine.
• Floppy Drive A
This item allows you to set the type of floppy drives installed. Available options: [None], [360K,
5.25in.], [1.2M, 5.25in.], [720k, 3.5in.], [1.44M, 3.5in.], [2.88M, 3.5in.].
