BIOS Setup
4.7 Secondary IDE Drives
4.7.1 Secondary Master
Select Auto BIOS will detects if a drive is installed and its CHS parameters. If Manual is
select, CHS parameters needs to be manually insert. Select None for no IDE drive installed
Drive Type:
None
No IDE drive is installed
Manual
Enter drive CHS parameters
Auto
BIOS detects if a drive is installed and its CHS parameters
Mode:
Auto
BIOS check if the drive supports LBA mode, if so LBA mode is
enable and used, otherwise CHS mode is use
CHS
Enter drive Cylinder, Head, Sector manually.
UDMA:
Configure PIO or UDMA modes of the IDE device.
4.7.2 Secondary Slave
Select Auto BIOS will detects if a drive is installed and its CHS parameters. If Manual is
select, CHS parameters needs to be manually insert. Select None for no IDE drive installed.
See description above for available options.
