Assembly Instructions
Step 1 :
MONITOR ASSEMBLY
a.
Connect the monitor wire to the sensor
wire.
b. Turn the monitor(13) over so that the
underside is displayed. Insert AAA
1.5V alkaline batteries in the
compartment. Take care to observe
the correct polarity (+/-).
c. Replace the monitor into the base.
Step 2:
TENSION ADJUSTMENT
Insert the adjustment knob(8) into the hole
at the rear of the base. Slowly lifting one
foot pedal may make this easier to do.
Step 3:
RESISTANCE TUBE WITH CARBINER
ATTACHMENT
If using the resistance bands, clip the
bands onto the eyelets as shown.
6
Summary of Contents for F1BC6059
Page 4: ...Overview Diagram 4...
