BC Biomedical PS-2200 series, User Manual

Page: 22 / 85

PS-2200
20
The rate, amplitude, adult/pediatric, artifact and ST elevation or depression can be selected
by using to highlight the parameter to change and using
to scroll to the desired value. Then is used to accept the new setting.
Alternately, to see a submenu of all the options for a highlighted parameter, use .
Use to scroll to the desired option. Then is used to accept the new
setting.
Auto Rate
If the BPM parameter is set to AUTO, the unit will automatically sequence through all of the
BPM settings, starting with 30 BPM, incrementing at a fixed interval. The interval may be
set in the System Setup Menu under “Auto Step Time”.
The key can be used to exit the Auto Mode during the sequence.
NOTE: ST Elevation or Depression is only active in Adult NSR at or below 180 BPM.
Displays time (seconds)
remaining before
advancing to next rate.