6
③ GAIN
This command allows you to lower the overall gain (-10dB)
on all of your sources. This allows you to adjust the fineness
of the volume adjustment depending on the sensivity of
your speakers and your listening level.
④ DIRECT
If this funcon is acvated (light signal acve), then the
BASS and TREBLE funcons are disabled. The purpose of
this funcon is to shut down the electronic circuit’s tone
control and balance in order to best preserve the purity of
the music signal.
⑤ BASS and TREBLE
The buon "BASS" seng can act on the relave level of
low frequencies to alter the tonal balance of the sound to
suit your room acouscs and your tastes. The "TREBLE"
buon for meanwhile high frequencies.
When these buons are in the middle posion, it means
that the tonal balance is not changed. The adjustable range
is ± 5 dB.
+5 decibels knob turned in the direcon of clockwise and
- 5 decibels knob turned anclockwise.
Tone Controls:
These funcons only affects music signals
output from the speaker outputs and the LINE OUT (RCA).
They are not acve on the REC output (for recording the
original signals).
⑥ VOLUME
This knob adjusts the output volume of the amplifier at the
speaker outputs.
SOURCE SELECTOR
These buons select the acve input of the amplifier and
the signal sent to the speakers, to headphones and Preamp
output and REC LINE. The buons on the remote control
are idencal to those buons. Once the selected buon,
the integrated LED corresponding entry under the parcular
input buon will turn white.
⑦ LINE 1 & LINE 2 (INPUTS)
These buons are used to select sources present on XLR
(balanced) and RCA inputs (line level) with the same name
located on the rear panel of the amplifier.
⑧ LINE 3 (INPUT) / BYPASS
This buon selects the source present on the RCA inputs
(line level) of the same name located on the rear panel of
the amplifier. This input has a switch (on the rear panel) to
override the funcons of Gain and Tone. It is usually used to
connect it to the part of an AV amplifier preamp.
⑨ DAC - OPTIC & COAXIAL INPUTS
This buon acvates the digital input on the back of the
amplifier. It allows listening to the digital source con-
nected to the amplifier with the integrated digital-to-analog
converter.
Note:
You can leave connect two sources (one on the
Opcal input, and the other on the Coaxial input) and
acvate the one that suits you the best by pressing the DAC
buon.
⑩ OPTION
Without Oponal card:
This buon selects the listening to
a 4
th
source you have connected to the RCA OPTION
connectors (rear panel).
With Oponal card:
This buon allows you to select the
source to play on your opon card. (See noce of the said
opon card).
.
Example of opon card: Bluetooth card allows you to listen
to your music from your Smartphone.
⑪ IR SENSOR
This window receives IR commands (Infra Red) from the
remote control. It is essenal that there is no obstacle
between the remote control and the sensor.
⑫ ON / OFF BUTTON
This switch allows shutdown or operaon of the amplifier.
Connecons and uses