7
ENGLISH
FRANCAIS
SP
ANISH
DEUT
SCH
Connections and uses
⑨ CD/USB CONTROL BUTTONS
PLAY / PAUSE (
II
)
Press this button to start playback or resume playback after
Pause. If the disc tray is open, press this button to automatically
close the tray and start playback if the disc is loaded.
During playback, press this button to pause playback while
maintaining the playhead to where it is on the disc surface.
To resume playback at the exact time of the pause, press
"PLAY / PAUSE."
SKIP / SCAN
Press
y
or
y
to move to the next or previous track.
Forward or backward in an accelerated manner, hold the
y
or
y
button continuously. The optical pickup is then read
before the recording or backward at high speed.
STOP
Pressing once on the "STOP" button stops playback and resets
the playhead at the beginning of the disc. The display returns
to the display of the number of tracks and total playing time on
the disc. If you programmed the CD player to play a selection of
tracks, the program will be stored in the player's memory.
In the programming mode, you can remove a program by
pressing twice on the "STOP" key.
OPEN / CLOSE
Press this button to open and close the disc tray.
Under the amplifier
SWITCH ANTI-HUM (GROUND ON / OFF)
Your EM-702 has a mains socket outlet
with a ground connection. The use of
this type of connection is recommended
for electrical safety reasons (including
wetlands). However sometimes this connection «mass» is the
origin of «hum» audible from the speakers in a hi-fi system to
solve this problem, the cancellation of the ground connection
is sometimes sufficient. To do this you have, under the device,
a switch to choose to connect or not the mass of the device to
the mains.
