5
ENGLISH
FRANCAIS
SP
ANISH
DEUT
SCH
⑥ WIRELESS ANTENNA
This connector is for receiving a WIRELESS antenna. The
supplied antenna is mounted directly to the back of
the unit. The WIRELESS range is limited to few meters
(depending on the nature of the obstacles located between
the EM-702’s antenna and your WIRELESS source).
It is possible to obtain an optional "WIRELESS long-range"
antenna. It consists of a cable to shifting the antenna.
Moreover, this antenna is larger.
⑦ LOUDSEPAKER TERMINALS
Connect the speaker to the terminals marked RIGHT "+ R" and
"R -" ensuring that "R +" is connected to the "+" terminal of the
enclosure and "R -" is connected to the terminal "- "the same
enclosure. Connect the LEFT speaker to the terminals marked
"L +" and "L -" by doing the same.
Make sure that no wires are not insulated can bypass the
speaker outputs. Make sure that the speaker terminals are tight
enough to ensure a good electrical connection. If the terminal
screws are not tight enough, the sound quality may be affected.
Use only dedicated wire to the speaker (a section of 1.5 mm² or
more is recommended especially if the cable length is greater
than 3m).
Important Note:
Check the impedance of your speakers.
When using a pair of speakers, you can use speakers with an
impedance of between 4 and 8 ohms.
⑧ INPUT VOLTAGE
IMPORTANT:
Before turning on your amplifier, check that you
have positioned the voltage selector based on your geographic
location: AC110V (USA, etc ...) and AC230V (EU, etc ...). Also be
sure to use a fuse appropriate for the selected voltage sector.
Connections
Example position voltage selector:
220V for Europe
110V for USA
fuse T2AL/230V
fuse T4AL/110V
⑨ AC MAIN INPUT
Once all connections to the stereo system, plug the power cable
into an outlet and turn the unit on. Your EM-702 is now ready
for use.
Connections and uses
Front panel
