Tx300-400-1000MK2-1000 Keypad-Ex4 MK2-TxLD Installation Guide 12Jan05.doc
Tx1000 MK2 (8/16 camera controller)
Page 17
CAMERA SELECTION
A camera may be selected onto the controlled monitor by pressing the relevant numbered camera key, 1-16.
MONITOR SELECTION
The monitor key has a red LED, which is lit when the keypad is controlling the second monitor output.
Pressing the monitor key toggles between controlling monitor 1 and monitor 2.
SEQUENCE ACTIVATION
Pressing the sequence key will start the camera sequence on the currently selected monitor. The on-screen
display changes from CAM XX to SEQ XX to indicate that the sequence is running. To stop the sequence,
select a camera on the main monitor.
PROGRAMMING THE SEQUENCE
Holding down the sequence key causes the sequence to run through the list of cameras at the rate of one
per second, allowing the operator to quickly determine which cameras are being sequenced. While the
sequence key is held down, any camera key pressed will toggle the inclusion or exclusion of the relevant
camera. When delivered, all camera inputs are included in the sequence.
ALTERING THE SEQUENCE DELAY
This is achieved by pressing the Program key, to gain access to the menu. The sequence delay time may
be altered using Option 9. The on-screen prompt "Seq Delay" appears, inviting the operator to enter a
number from 1 to 16 for the following values:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
5 seconds
10 seconds
15 seconds
20 seconds
25 seconds
30 seconds
35 seconds
40 seconds
45 seconds
50 seconds
55 seconds
60 seconds
65 seconds
70 seconds
75 seconds
80 seconds
After entering the delay value, the screen clears.
THE TRIANGLE/RELAY KEY
This key activates a relay in the base unit. Pressing the key causes triangle relay contacts to changeover;
releasing the key causes the contacts to revert to original position. This relay may be used by the installer to
activate a panic record facility on a VCR, or to activate a video printer, etc. These contacts are low-voltage,
low-current only.
IMPORTANT: DO NOT CONNECT THESE CONTACTS TO MAINS POTENTIALS
Summary of Contents for Ex4 MK2
Page 34: ... blank for your notes ...
Page 35: ... blank for your notes ...
