background image

SSS3416TB 
Owner’s Manual 

7

 

Assembly Instructions 

 

Remove all contents from the carton packaging. Make sure all parts are present before attempting assembly. Once the grill is 
fully assembled, go back and check to make certain all the bolts are secure. Tighten again using the screwdriver provided if 
necessary.  
 
Estimated Assembly Time: 30 minutes. 

 
 
 
 
 
 
 

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 
 
 
 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Step 1 (The cart side panels 
assembly) 
 

Note: Before beginning assembly, 
make certain the two swivel 
casters on the cart bottom (R) are 
locked. 

a) 

Loosen the six pre-installed 
bolts on cart bottom (R) and 
allow 1/4 bolt’s length to 
extend from the bottom 
assembly. 

b) 

Align the three large holes on 
the right side cart panel (T) 
with the three bolts extended 
from the bottom assembly. 

c) 

Slide the right side cart panel 
until it locks into place. 
Tighten bolts by hand until 
secure. 

d) 

Repeat the procedure for the 
left side cart panel (L) 
assembly. 

e) 

Go back and tighten all bolts 
using the screwdriver 
provided. 

Step 2 (The back panel assembly) 
 

a)  Loosen the four pre-installed 

bolts on the right and left side 
panels and allow 1/4 bolt’s 
length to extend from the cart 
side panels. 

b)  Align the four holes on the 

back panel (O) with the four 
bolts extended from the right 
side cart panel and left side 
cart panel. 

c)  Push down the back panel 

until it locks into place.   

d)  Tighten all bolts using the 

screwdriver provided.   

   

Summary of Contents for SSS3416TB
























Reviews: