GSF3016A
Owner’s Manual
10
OO
PP
Pre installed BoltX8
-
Step 8
a) Align the two holes on right side of body assembly
with the two holes on the right side shelf. Then insert
one bolt (B), one spring washer (C) and one flat
washer (D) into each hole. T
ighten by hand until
secure.
b) Repeat the procedure for the left side of the body
assembly.
c) Go back tighten all bolts using the screwdriver
provided.
Step 7
a)
Loosen the four pre-installed
bolts on the side of control
panel and left cart back leg, and
allow 1/4 bolt’s length to extend,
align the holes on the left side
shelf with the extended bolts,
then push down on the left side
shelf until it clocks into place,
tighten by hand until secure.
b)
Repeat the procedure for the
right side shelf assembly.
c)
Go back and tighten all the bolts
using the screwdriver provided.
B X4
(
)
C X4
(
)
D X4
(
)
