GSF3016A
Owner’s Manual
8
Step 3
a) Loosen the two pre-installed bolts on the left cart
back leg and the left cart front leg, and allow 1/4
bolt’s length to extend from the legs. Align the
holes on the upper cart side beam (HH) with the
extended two bolts on the legs. Push down on
the upper cart side beam until it clocks into
place, insert one bolt (A), one spring washer (C)
and one flat washer (D) into each hole on the
legs. Tighten by hand until secure.
b) Repeat the procedure for the right upper cart side
beam (HH) assembly.
c)
Loosen the lower two pre-installed bolts on the
left front
leg and back leg, and allow 1/4 bolt’s length to
extend from the legs. Align the holes on the
lower cart side beam (II) with the extended two
bolts on the legs. Push down on the lower cart
side beam until it locks into place. Tighten by
hand until secure. Repeat the procedure for the
right lower cart side beam(II) assembly.
d) Go back and tighten all the bolts using the
screwdriver provided.
Step 4
a) Insert the axle (LL) into the holes on the
right cart front leg and back leg.
b) Put one collar (J) on each end of the
axle, and then put one wheel (JJ) on
each end of the axle. Screw one lock
nut (I) on each end of the axle using the
wrench (L) provided.
c) Insert one wheel cap (KK) on each
wheel.
J X2
(
)
KK(
)
X2
JJ(
)
X2
LL
