background image

GSF2616AC 
Owner’s Manual

 

18

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Printed in China

 

Warranty Program

 

Proof of purchase 

is required to access this warranty program, which is in effect from the date of purchase. If unable to 

provide proof of purchase or after the warranty has expired, customers will be subject to parts, shipping and handling fees.
 

Full 30-Day Warranty 
Any missing parts can be replaced at no charge within 30 days from the date of purchase with a valid proof of purchase. 

Limited Warranty

 

1-Year Limited Warranty on all parts in regards to damage affecting the operation of the gas grill. 

 

Warranty Provisions: 
-  This warranty is non-transferable and does not cover failures due to misuse or improper installation or maintenance. 
-  This warranty is for replacement of defective parts only. We are not responsible for incidental or consequential 

damages or labor costs. 

-  This warranty does not cover chips and scratches of porcelain or painted surfaces, nor does it cover corrosion or 

discoloration due to misuse, lack of maintenance, hostile environment, accidents, alterations, abuse or neglect. 

-  This warranty does not cover damage caused by heat, abrasive and chemical cleaners, resulting in chipped porcelain 

enamel parts or any damage to other components used in the installation or operation of the gas grill. 

 

If unable to provide proof of purchase or after the warranty has expired, customers will be subject to parts,  
shipping and handling fees. 

 

Some provinces do not allow the  limitation  or exclusion of incidental or  consequential damages, so the above

limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have 

other rights that vary from province to province.

 

If you have any questions related to the product or warranty, please visit our website at

 www.bbqtek.com 

 or email us 

to 

[email protected] 

 or call our customer service center at 1-877-885-8227, 07:00 A.M. to 16:00 P.M. (EST), Monday

through Friday.

 

1-Years Limited Warranty on stainless steel tube burners. 

Manufactured by:

 

 

Lucas BBQ Co., Ltd. 
Niuyang Industrial Zone, Liaobu 
Town, Dong Guan City, Guang 
Dong, China.    

Summary of Contents for GSF2616AC




















Reviews: