If the pit temperature is within its strategy range and the fan is blowing, the top and bottom of the outer Q ring
will remain solid red while the left and right sides pulse red.
TIP:
If the pit has been running for several hours and the sides begin to pulse more often or constantly,
additional charcoal might be needed. If the temperature is oscillating or overtemperature and the sides are not
pulsing or are pulsing infrequently, close the fan damper slightly.
If the pit temperature is above the set temperature by its deviation range, the outer light ring will pulse red
continuously. The default deviation range is 25°F. For more information or to change the deviation range, see
Section 10.4 Alarm Deviation.
When the DynaQ is connected to power but has no pit probe connected, the outer ring will blink rapidly. This is
a safety feature so the fan will not run unless a pit probe is inserted.
To clear either of these visual alerts, push the SELECT button depicted below.
Summary of Contents for DynaQ
Page 1: ...DynaQ User Guide...
