SECTION 1B :
INSTALLATION - HEART RATE
The hear t rate sensors are integrated in the soft elastic belt. For
a correct hear t rate measurement, the belt must be positioned
slightly below your chest, directly on your skin.
1. Make the two contact areas moist before you star t your exer-
cise.
2. The chest belt needs to be snug to stay in place. Slide the
buckles to adjust the length of the belt for a snug but com-
for table fit.
3. Press the ANT+ transmitter to the elastic belt on the two
push-button connectors.
Maintenance
- Remove the transmitter from the elastic belt after ever y use
and dr y the push-buttons connectors on the transmitter.
Rinse the soft elastic belt under running water after ever y
use.
- Wash the elastic belt regularly in a washing machine at 30ºC.
Use a washing pouch. Do not spin-dr y, iron, dr y clean or
bleach the elastic belt. Do not use detergent with bleach or
fabric softener.
- Never put the transmitter in the washing machine!
INSTALLING THE HE ART R ATE SENSOR
The sensor batteries are pre -installed. When needed, check below illustrations for correct
replacement.
1. Open the batter y cover by turning the cover counter clockwise.
2. Inser t the batter y (CR 2032) with the negative side (-) facing up for 3 seconds. This will
reset the sensor.
3. Inser t the batter y (CR 2032) with the positive side (+) facing up. Close the batter y cover
by turning it clockwise.
Batteries should be disposed of in compliance with local regulations.
» BATTERY REPL ACEMENT FOR THE HEART RATE SENSOR
1
2
6
+
3 s
All manuals and user guides at all-guides.com