SECTION 2B :
FIRST TIME SET-UP : SETTINGS
1. It is possible to set the TOTAL TIME data into your new bicycle computer. To select the first
digit, press + or -
2. To select, press M. Repeat these steps to select the other digits.
SETTING TOTAL TIME 1
1
2
1. During the pairing procedure the computer makes a secured digital connection with the
sensors. Once a sensor is found the computer will show “SPD FOUND”, “CAD FOUND” and/
or “HRT FOUND”, depending on the type of sensors you are using.
During the pairing process the hear t rate, cadence and speed symbol will flash in the dis-
play. When a sensor is found, the symbol will stop flashing. Before you star t using your bicycle
wait until the pairing process is completely finished and the computer display shows the main
screen.
Once sensors are paired the connection is stored in the computer memor y. The pairing process
does not have to be repeated before each ride.
The pairing procedure can be repeated manually by pressing the M and F button together for 3
seconds.
Star ting the pairing procedure manually is needed when sensors cannot be found or when a later
bought sensor needs to be paired.
PAIRING
1
3 s
3 s
16
All manuals and user guides at all-guides.com