4. USE IN THE VEHICLE
4.1. Installation position of the enhanced child seat in vehicle
This is an i-Size Enhanced Child Restraint System. It is approved
according to UN Regulation No. 129/02, for use in, i-Size compatible vehicle
seating positions ,as defined and approved according to UN Regulations No.16.
According to UN Regulation No.129/02, this enhanced child seat is a Universal
ISOFIX Child Restraint and should be fitted using the ISOFIX connections.
To use this enhanced child seat approved to the ECE R129/02 Regulation, your
child must meet the following requirements.
Forward Facing: Child height 76cm-105cm/ Child weight≤ 22kg;
Rearward Facing: Child height 40cm-87cm/ Child weight≤ 22kg;
If in doubt, consult either the Enhanced Child Restraint Systemmanufacturer or
the retailer.
WARNING : DO NOT use rearward facing child seat in seating positions where
an active frontal airbag installed .
"IMPORTANT - DO NOT USE FORWARD FACING BEFORE THE CHILD'S
AGE EXCEEDS 15 months (Refer to instructions)".
4.2. Checking the shoulder strap height
NO-Too low
NO-Too high
Yes- Correct
Always check that the shoulder straps are at the same correct height for your
child. The child’s shoulders should always be thread through the slots in the
cover and seat shell that are closest to the top of your child’s shoulders.
4.3. Usage of buckle
Firstly ,adjust the shoulder straps height ,please proceed as follows:
Step1. Put the two metal sections of the buckle connector together.
Step2. Slot the two buckle connectors into the slot in the buckle until they “click”
1
1
in place.
2
3
2
3
Step3. Check the harness is correctly locked by pulling the shoulder straps
upwards.
To release the harness ,you can press the red button of the buckle downwards,
the two metal sections will be pop up .
