Harley Davidson
Installation Manuel
Preparation
Disassembly of Motorcycle:
1. With motorcycle on its center stand and on solid level
ground, switch off ignition switch and remove seat.
2. Before doing any electrical work to your motorcycle.
It is good practice to disconnect the negative
battery
terminal, then the positive terminal. Disconnecting
the terminals in this order will minimize the chance
of sparks and voltage spikes. When reconnecting
do
the reverse connect positive then negative
terminals.
1. Remove bolts at the bottom of the fairing inside of
the forks.
(2 bolts)
( Fig. 1-1 )
2. Remove bolts under handgrips on outer fairing.
(2 bolts)
( Fig. 1-2 )
3. Remove bolts in front of firing. Remove outlet bolts.
Leaving center bolt to hold fairing. Remove center
bolt and unplug headlight.
(3 bolts)
( Fig. 1-3 )
Fig 1-1
Fig 1-2
Fig 1-3
