DS-RPC OWNER’S MANUAL
CABLING
__________________________________________________________________________________________
15
DS74 EIA-232 RJ-45 Pin/Signal Definition
Pin
EIA-232
Signal
Description
1
Handshake
Out
(DTR) Line Driver Inactive State = Low: Used as a handshake line
to enable/disable the receiving of characters. –12V when port is not
selected unless programmed differently.
2
Gnd
Signal ground
3
Handshake
Out
(RTS) Line Driver Inactive State = Low: –12V when port is not
selected unless programmed differently.
4
TX Out
Transmit Data (data out)
5
RX In
Receive Data (data in)
6
Handshake
In
(DSR) Handshake In. +12V when not used.
7
Gnd
Signal ground
8
Handshake
In
(CTS) Used as a handshake line to enable/disable the receiving of
characters.
Table 3 DS74 PIN SIGNAL DEFINITION
The DS74 module has four RJ-45 ports for connecting to
peripheral devices. BayTech has a complete line of modular
adapters and cables that may be helpful with your installation. For
more information on these cables and adapters, contact BayTech’s
Applications Engineers.
Summary of Contents for DS-RPC
Page 8: ......
