Assembly Instructions for Table Top
10. Screw by hand four Suction Cups with Threaded Pin (7) into the middle threaded
inserts on Left & Right Side Panel (D & E). See detail #5.
11. Screw the Glass Raisers (8) into top holes of both Shelf Frame Assemblies and Side
Panels (D & E) into place. Insert the tab of Glass Bumper (9) into the center hole of
Glass Raiser as shown in detail #5.
12.
Place Top Glass (F) onto the Top Shelf Frame Assembly, make certain the Glass Raisers
fixed underneath the Top Glass align with both middle rail holes on Top Back Frame (A),
secure the Top Glass in place using 3 1/4” Bolts (part 13) with Lock Washer & Flat Washer
(4 & 5). Place the Glass Shelves (G) onto the Suction Cups with Threaded Pin inserted and
the Glass Raisers with Bumper on Bottom Shelf Frame (B). See detail #5.
Note: Make sure the Glass sits securely on the top of the Suction Cups and Glass
Bumpers. If glass is scratched you can repair by using a BLACK marker and filling in
scratched area from underneath.
Please call for replacement parts or assistance:
1-877-494-2536
Parts Required
Qty Parts Required Qty
F - Top Glass
(1) G –Glass Shelf (2)
(4)– Lock Washer
(2)
(5) – Flat Washer
(2)
(7) - Suction Cup with Threaded Pin (4)
(8) – Glass Raiser (10)
(9) – Glass Bumper
(10) (13)- 3 1/4” Bolt
(2)
Tools Required
Allen Wrench
Bayside Furnishings Mfg. Inc.
Factory No. 33-10944
Page # 9
