Mounting Monitor Bracket to a television with a curved / recess back
23. Determine the correct diameter of the bolt your TV requires by hand threading them
into the threaded insert on the back of the TV. If you encounter any resistance, stop
immediately. If you are unable to find the correct bolt consult a local hardware store.
24. Once you have determined the correct diameter Bolt, follow the appropriate Diagram
below, thread the Bolt through the appropriate Lock Washer, the Large Flat Washer,
the Monitor Bracket (J), a second Large Flat Washer (M4/M5 Diameter Bolts only),
appropriate Spacer and into the threaded inserts of TV. See detail #10.
25. Make sure the Monitor Brackets (J) are vertically centered and level with each other.
Tighten the bolts to secure the Monitor Brackets (J) to the TV.
Please call for replacement parts or assistance:
1-877-494-2536
Bayside Furnishings Mfg. Inc.
Factory No. 33-10944
Page # 14
Parts Provided
Qty
Tools Required
J – Monitor Bracket
(2)
Phillips Screwdriver
TV Mounting Kit
