Assembly Instruction for installing XYZ Mounting Frame onto BRICK, SOLID
CONCRETE OR CONCRETE BLOCK
17. Use the XYZ Mounting Frame (I) as a template, mark six holes location on the wall,
three in the top row and three in the bottom row of slots. Make sure that the holes are
level and there is at least 6” between any two holes, pre-drill these holes with a 1/2”
masonry bit to at least 2 1/2” in depth.
18. Insert a Concrete Anchor (11) into each of these holes; make sure they are completely
seated and flush with the concrete surface, even if there is a layer of drywall or other
material in front of the concrete.
19. Attach the XYZ Mounting Frame (I) to the Wall using six Lag Bolts (12) and Large Flat
Washers (6) through the slot of “U” Plate on Mounting Frame into the Concrete
Anchor in the wall as shown in detail #8. Make sure the back hook of Mount Frame is
bottom.
Maximum weight 165 lbs.
Please call for replacement parts or assistance:
1-877-494-2536
Bayside Furnishings Mfg. Inc.
Factory No. 33-10944
Page # 12
Parts Provided
Qty
I – XYZ Mounting Frame
(1)
(6) – Large Flat Washer
(6)
(11) –1 3/4” Concrete Anchor
(6)
(12) – 2 1/2” Lag Bolt
(6)
Tools Required
Mallet, Power Drill, 1/2” Masonry Bit for brick concrete, 1/2” Socket Set
