![background image](http://html1.mh-extra.com/html/bayrol/naturally-salt-salt-relax-power/naturally-salt-salt-relax-power_operating-and-installation-manual_2713062035.webp)
8 Description of the device
35
7.4
Web portal www.naturally-salt-poolaccess.com
Please proceed as follows as soon as the connection to the network is established:
Call up the website: www.naturally-salt-poolaccess.com
Choose the "Registration" option and enter the required data. You will find the node ID in the Settings -> System Info - > Power module
menu.
Once all the settings have been made, you will have extensive remote access to your Salt Relax POWER. For example, you can choose
the performance of the electrolysis setting, change filter times or switch connected functions using the additional relay.
If you are using the pH and/or Rx option, you will also see the related measured values.
8
Description of the device
Necessary qualification:
Only specialists with both in-depth knowledge of swimming pool construction and in-depth knowledge of the installation of electrical
and electronic devices may open the Salt Relax POWER or perform the connection work described below!
Danger caused by electrical current
The Salt Relax POWER is live as soon as voltage is applied to the power input. The chlorine production cell or additional functions
may be switched on or switched over. Contact with live components can lead to an electric shock.
This may result in serious or even fatal injury and damage to material assets, and the following therefore apply:
All such tasks must be carried out exclusively by adequately trained and experienced personnel!
The device must always be de-energised before performing installation and maintenance work on it!
Secure the device against being switched on while work is being performed on it!
Additional modules must be installed/removed in de-energised state!
Cables must also be connected in de-energised state!
A safety feature which is independent of the controller should always be present!
Where necessary, password protection for the main menu must be activated!
The relevant country-specific safety regulations must be complied with!
All safety features and protective devices must be refitted or rendered functional again immediately after completing work!
Failure to follow the safety instructions can cause the device to malfunction, may lead to the risk of fatal injury and renders the
warranty invalid!
ATTENTION
To prevent electrostatic discharge damaging the sensitive electronic components when you are performing work on the opened
device.
If possible, earth yourself when working on the opened device.
Avoid touching the electronic components unnecessarily.