![background image](http://html1.mh-extra.com/html/bayrol/naturally-salt-salt-relax-power/naturally-salt-salt-relax-power_operating-and-installation-manual_2713062020.webp)
4 Operating the Salt Relax POWER
20
4.4.5
Sound
Defines the events which trigger an acoustic signal.
To set, select Sound with
/
and confirm with
Keyboard
To activate a confirmation tone when a key is pressed, select On using
and
.
Pop-ups
To activate the acoustic signal when pop-up messages are displayed,
select On using
and
.
Alerts
To activate the acoustic signal when an alert (AL3) is issued, select On
using
and
.
Filtration
To activate the acoustic signal at the start of a filtration cycle, select On
using
and
.
4.4.6
Password
This setting defines whether access to the menus from the basic screen is password-protected.
To set, select Password with
/
and confirm with
Password
To activate password protection, select On using
and
.
You will be prompted to enter a 5-key password. Enter a key combination
of your choice. You will be asked to enter this password each time you
want to access the menu level from the main screen.
Remember your password.
To deactivate password protection, select Off using
and
, and
confirm with
. If you should forget your password, the Service
password can be used to override your forgotten password. In this way,
you can return to the menu item Password and deactivate it by selecting
Off. Then press On, and you will be asked to set a new password.
4.4.7
Cell hours
Time info displays the switch-on time of the chlorine production cell in hours/minutes/seconds.
4.4.8
System info
System info provides detailed information on the screen used in the system and the power unit.
This information is only relevant for servicing of the devices.
4.4.9
Service menu
The Service menu and all settings which can be made therein are reserved exclusively for the use of specialist service technicians.