4
1.
General safety instructions
This operating manual contains basic instructions that must be
complied with for installation, commissioning, operation, and
maintenance. Consequently this operating manual must always
be read by the fitter as well as the responsible owner prior to
installation and commissioning, and must be accessible to
every user of the device. In addition, all other safety
instructions in this document must be strictly complied with.
Read and comply with all instructions.
To reduce the danger of injury, do not allow children to use this
product.
Dangers due to failure to comply with the safety
instructions
Failure to comply with the safety instructions can result in
hazards for personnel as well as for the environment and the
device.
Failure to comply with the safety instructions can result in loss
of all claims for damage compensation.
DANGER!
Inadequate qualification of personnel
Dangers due to inadequate qualification of
personnel!
Possible consequence: Death or severe injury,
significant damage to material assets.
The system owner must ensure compliance
with the required qualifications.
All activities must only be carried out by
personnel who are qualified to perform such
activities.
Access to the system must be prevented for
inadequately qualified personnel..
IMPORTANT NOTE!
Compliance with the applicable accident
prevention regulations and the other statutory
regulations and the generally acknowledged
safety regulations must be ensured by the system
owner!
IMPORTANT NOTE!
Only liquid flocculants from the company
BAYROL may be dosed with the Flockmatic. The
use of flocculants or other products from other
manufacturers results in loss of all damage
compensation claims!
DANGER!
Compliance with the protection rating
After tasks on the Flockmatic, if the housing or
individual cable glands are not properly closed, so
that a reliable seal is ensured, moisture can
penetrate into the device.
Possible consequences: Damage or
destruction of the Flockmatic, malfunctions.
After all tasks performed on the device,
ensure a safe seal.
2.
General
The Flockmatic is a high quality peristaltic pump for dosing of
flocculant (Quickflock Automatic Plus) in to the circulation
system of a swimming pool.
The pool must be equipped with a properly sized sand/glass
filter.
Technical data:
The Flockmatic is a high quality stepper motor that requires no
gears.
With the supplied hose, the capacity is - 0.01 l / (10ml / h).
Max. pressure:
1.5 bar
Flow rate:
0,01 l/h (10ml/h)
Protection class housing:
IP65
Dimension
(without wall mounting panel,mm):
approx. 93x150x130
(BxHxT)
Electric power supply:
230 V / 50 Hz
3.
Electrical connection
The Flockmatic pump must be connected in a way that it only
works when the circulation pump is running.
The Flockmatic must be isolated when carrying out a backwash
of the sand/glass filter. T
he Flockmatic must be installed in
such a way to ensure that it is switched off during Backwashing
of the filter.
The Flockmatic can easily be connected to the PoolManager
®
.
Please refer to the operating instructions of the PoolManager
®
.
4.
Installation in the circulation
system
The Flockmatic is supplied ready for installation on a panel for
wall mounting. The pump is preferably mounted at a height of
about 1.5 m on the wall. The container with
Quickflock Automatic Plus is placed directly under the
Flockmatic pump in order to keep the Suction tube as short as
possible. Read the safety instructions on the label of the
container of Quickflock Automatic Plus. Do not dispense any
liquids other than liquid flocculant with this pump!
