Bayne Thinline BTL 208-12, Operation And Parts Manual

Page: 14 / 38

Document Number: 1999-0212 Issue Date: 06/06/07 Revision No: 005 Page: 14 of 38
MAINTENANCE INSTRUCTIONS ( WI-0140-A )
Bayne THINLINE
®
Premium Lift Systems
NOTE:
THE MOST COMMON CAUSE OF HYDRAULIC COMPONENT FAILURE
IS CONTAMINATION OF THE HYDRAULIC FLUID ( WATER, CHIPS,
DIRT, ETC. ) THE Bayne
THINLINE
®
LIFT SYSTEM COMES CLEAN
FROM THE FACTORY. IF REMOVED, BE SURE THE HOSES,
CYLINDER AND FITTINGS ARE CLEAN BEFORE RE-INSTALLING
THEM ON THE UNIT.
Inspect your cart lifter on a weekly basis for loose bolts, fittings, oil leaks, etc. Tighten loose
hardware as necessary and replace necessary seals to repair oil leaks.
In order to maintain warranty and for preventive maintenance, grease all points weekly with a
good multi-purpose grease at points shown in the lubrication drawing
( APPENDIX A ).