9
PoWDEr fEEDEr
Step 4:
Thoroughly clean the auger assembly
and the powder body interior of dry product.
Step 5:
Open the hopper lid and clean the
interior of dry product.
Step 6:
When ready to use, replace the auger tube and gasket. Tighten
hardware securely. Connect the powder tube assembly to the auger
tube and the mixing bowl cover.
Note: for complete gear motor service instructions, refer to
manufacturer’s manual shipped with the powder feeder.
PM cHEcKlISt
Powder feeder PM checklist
1:
Clean powder feeder - Weekly
cbt25, 50 & 100
cbt200 only
cbt25, 50 & 100
cbt200 only
