14
MIXINg boWl
bowl cover
Step 1:
Loosen and remove (4) wing nuts on
chemical inlet plate. Remove plate from cover.
Step 2:
Loosen and remove the seed inlet
collar from the bottom of the transition.
Step 5:
Hook each scale clamp into the bowl
cover. Lift both clamps up to lift up the bowl
cover.
Step 6:
Carefully move the swing arm and
bowl cover away from the mixing bowl.
Step 3:
Disconnect each hold down clamp
on the bowl cover.
Step 4:
Push each tab in to lower both scale
clamps.
Remove lid cleanout panel B
Remove lid cleanout panel A
Remove chemical inlet plate
For CBT25,
50 & 100 see
pictures above.
Remove wing
nuts. Remove
3-piece Plates.
cbt200 bowl cover only
