Step 3:
Remove the atomizer with a wrench.
• Use a rag to thoroughly clean the atomizer and atomizer housing.
• This is recommended after each treating session, to avoid unnecessary chemical and seed buildup, as shown left.
• Replace the atomizer on the shaft.
• Push it up on the shaft until it touches the chemical tube, then back it off a little.
• Tighten the nut.
Step 4:
Replace the clean Transition under the Atomizer Housing.
• Align the Transition to the back lip of the Housing and ensure each clamp is in line with the grooves on the transition.
• Close each Clamp to securely fasten the transition in place.
5
