USING THE
MAIN MENU
44
®
45
USING THE
MAIN MENU
REMINDER
COUNTDOWN
2
hrs
30
mins
Start
Start
Change
Change
Go Back
Go Back
REMINDER
CHANGE COUNTDOWN
2
hrs
30
mins
OK
SETUP
OK
Pump Options
Reminder: On
Date
Reminder in:
15
mins
3
hrs
Change
Change
Done
Done
REMINDER
REMINDER IN
2
hrs
30
mins
Stop
Stop
Change
Change
Go Back
Go Back
SETUP
OK
Reminder
Date: 13.10.10
Time
DATE
13 . 10 . 10
dd.mm.yy
Change
Change
Go Back
Go Back
SETUP
Pump Options
Reminder: Off
Date
OK
DATE
SELECT
Month/Day/Year
Month/Day/Year
Day.Month.Year
Day.Month.Year
DATE
13 . 10 .
11
CHANGE YEAR
OK
Date is set.
Done
Done
Change
Change
13 . 10 . 11
6.
A confirmation screen appears and you can select
Change
or
Done
.
If you accept the reminder, a reminder icon
will appear in the Setup and Main Menu
headers.
NOTE: If you decide to test within 15 minutes before the reminder time, the
countdown stops when you insert a test strip.
3.
Press the
button to highlight
Reminder: On
.
Press
OK
to turn the Reminder OFF.
4.
Select
Stop
. A confirmation screen appears and
the countdown stops.
5.
Reminder is now off.
4.
To accept the preset time shown, select
Start
. To
change the time, select
Change
and you can change
the reminder time in 15-minute increments from
15 minutes to 23 hours, 45 minutes.
5.
After you have selected hours, press
OK
. After you have
selected minutes, press
OK
.
T
ur
ning Of
f a Reminder
Date and Time
Turning Off a Reminder
To turn off a reminder, you can use the Setup Menu, or do a blood sugar test within
15 minutes of the reminder time. To use the Setup Menu:
1.
Press and hold the top
Menu
button to turn the meter on.
2.
Press the
button to highlight
Setup
. Press
OK
to select.
Date and Time
Setting the Date (When Not Connected to a Pump)
You can set the date and time on your meter only when the meter is
NOT
connected to a
pump. If the meter is connected to a pump, date and time are set on the pump (see Setting
the Date and Time When Connected to a Pump, page 46).
1.
Press and hold the top
Menu
button to turn the meter on.
2.
Press the
button to highlight
Setup
. Press
OK
to select.
5.
Select either format,
Month/Day/Year
or
Day.Month.Year
.
3.
Press the
button to highlight
Date
. Press
OK
to select.
6.
Press the
or
button to select the correct year,
month and day. Press
OK
after each selection.
7.
A screen confirms the date you entered. Press
Done
if
the date is correct.
Setting the Time (When Not Connected to a Pump)
You can set the date and time on your meter only when the meter is
NOT
connected to a
pump. If the meter is connected to a pump, date and time are set on the pump (see Setting
the Date and Time When Connected to a Pump, page 46).
1.
Press and hold the top
Menu
button to turn the meter on.
2.
Press the
button to highlight
Setup
. Press
OK
to select.
4.
To change the date, press
Change
.
84647013_CntrNextLINK2_4_UG_EN_FpBp_v3.indd 44-45
84647013_CntrNextLINK2_4_UG_EN_FpBp_v3.indd 44-45
3/18/13 8:05 AM
3/18/13 8:05 AM
