16
PRE-PUMP TMR
This timer controls the start time of the pumps after the seed gate is open and seed enters the bowl.
• Each timer has an Accumulator (ACC) which is shown first.
• Operators will need to use the arrow down key to scroll through the different timers.
• The PRE after the timers are where operators set the time desired or need for the task.
Examples:
If there is seed left in the hopper, the operator will increase the Bowl Filling Timer, or if there is not enough / or too
much chemical, the operator will adjust the Pump 1 Timer.
If the seed is too wet when it discharges, the operator will increase the Drying Timer. If there is seed left in the bowl
after the bowl discharge door closes, the operator will increase the Discharge Timer.
Continued
F1 F2 F3 F4
F5 F6 F7 F8
PRE-PUMP TMR.........1.0
SCREEN 5 - F5
Displays the accumulating count of the following timers:
•
PRE-PUMP TIMER
F1 F2 F3 F4
F5 F6 F7 F8
PRE-PUMP TMR.........1.0
Summary of Contents for CBT BASIC TURNKEY 80996381
Page 1: ...CBT BASIC TURNKEY 80996381...