Multifunction Baby Bottle Warmer
EN
9
■
Place the cap A
1
down on to the bowl containing the food .
■
Check that the control dial A
6
is in the "OFF" position (turned off) and plug the bottle warmer into
a power socket .
■
Select a heating method by turning the control dial A
6
to the right to the "bowl 70 °C" symbol . This
is the expected water temperature around the bottle . This is not the food temperature .
■
The indicator light A
5
signalises that the bottle warmer is running .
■
During the warming up process, the light will turn on and then turn off once the water around the
bottle is heated to the maximum temperature .
■
After reaching 70 °C, the water temperature is maintained at the same level until the appliance is
turned off by turning control dial A
6
to the left towards the "OFF" symbol (turned off) .
■
Always test the food once it reaches the desired temperature, immediately remove it from the bottle
warmer .
■
Stir the baby food or milk after taking it out of the bottle warmer .
Sterilisation
■
Pour 180ml of water into the heating tank A
3
.
■
Place the accessories that you wish to sterilise, such as baby bottle nipples, dummies or other baby
feeding accessories directly into the heating tank A
3
.
■
Place the cap A
1
down on to the bottle warmer .
■
Select a heating method by turning the control dial A
6
to the right to the "100 °C" symbol .
■
The indicator light A
5
signalises that the bottle warmer is running .
■
During the sterilisation process, the light will turn on and then turn off once the water is heated to the
maximum temperature of 100 °C .
■
After reaching 100 °C, the water temperature is maintained at the same level until the appliance is
turned off by turning control dial A
6
to the left towards the "OFF" symbol (turned off) .
■
Allow the accessories to be sterilised for approx . 5 minutes . Then turn off the appliance by turning
the control dial A
6
to the left towards to the "OFF" symbol (turned off) .
