manualshive.com logo in svg

Bay Networks 5393, User Manual, Page: 51 / 70

Share
Download
Bay Networks 5393 User Manual Download Page 51

33

    Release 5.1 Supplement for Remote Annexes

119346-A Rev. A

Tunnel Reject

The Remote Annex creates a log entry whenever it rejects L2TP tunnel
establishment with a peer. When an L2TP tunnel is rejected, the log
contain Acct-Status-Type (40) = Tunnel-Reject [VSE Bay Networks
10]. The Remote Annex also includes the following attributes, when
applicable, in this log:

•

NAS-IP-Address (4)

•

Acct-Delay-Time (41)

•

Annex-Tunnel-Type (VSA Bay Networks 36)

•

Annex-Tunnel-Medium-Type (VSA Bay Networks 37)

•

Annex-Tunnel-Client-Endpoint (VSA Bay Networks 38)

•

Annex-Tunnel-Server-Endpoint (VSA Bay Networks 39)

•

Annex-Tunnel-Id (VSA Bay Networks 40)

MP Start

The Remote Annex creates a log entry whenever an MP bundle is created.
For MMP, this will be logged only on the LNS. In this case, Acct-Status-
Type (40) = MP-Start [VSE Bay Networks 13]. The Remote Annex
also includes the following attributes, when applicable, in this log:

•

NAS-IP-Address (4)

•

NAS-Port (5) = MP [6000] + index

•

Acct-Delay-Time (41)

•

Acct-Multi-Session-Id (51)

•

NAS-Port-Type (61) = Virtual [5]

Summary of Contents for 5393







































































Reviews:

No comments