manualshive.com logo in svg

Bay Networks 5393, User Manual, Page: 29 / 70

Share
Download
Bay Networks 5393 User Manual Download Page 29

11

    Release 5.1 Supplement for Remote Annexes

119346-A Rev. A

Configuring Remote Annex Functions Using
RADIUS

You can configure Remote Annex functions by setting the values of
RADIUS attributes on the RADIUS server. This section details what
RADIUS attributes must be set to enable various Remote Annex
functions.

In the descriptions that follow, note that numbers for packet types appear
in braces {1}, numbers for attributes appear in parentheses (1), and
numbers for enumerations appear in brackets [1].

End User and Session Identification

The Remote Annex provides identification information to the RADIUS
server via attributes included in Access-Request packets. Access-Request
packets includes the following RADIUS attributes:

•

User-Name (1)

•

User-Password (2)

•

CHAP-Password (3)

•

NAS-IP-Address (4)

•

NAS-Port-Type (61)

•

NAS-Port (5)

•

Service-Type (6)

•

Framed-Protocol (7)

•

Called-Station-Id (30)

•

Calling-Station-Id (31)

•

Annex-Product-Name (VSA Bay Networks 33)

•

Annex-SW-Version (VSA Bay Networks 34)

Summary of Contents for 5393







































































Reviews:

No comments