manualshive.com logo in svg

Bay Networks 5393, User Manual, Page: 30 / 70

Share
Download
Bay Networks 5393 User Manual Download Page 30

119346-A Rev. A

    Release 5.1 Supplement for Remote Annexes

12

Automatic Connection

You can configure RADIUS to connect a user to a specific service
automatically when the user calls in. The Remote Annex port must be in
CLI mode (through the port parameter mode set to cli or auto_detect).
The RADIUS attributes Service-Type (6), Framed-Protocol (7), and
Login-Service (15) determine the service to which the user is connected.

Table 1

 shows the services to which a user can be connected automatically

based on a given value of Service-Type (6) and Framed-Protocol (7) or
Login-Service (15).

Table 1. Remote Annex Automatic Services

Telnet/rlogin

The Login-IP-Host (14) attribute specifies the Internet address to be
connected to via telnet or rlogin. If Login-IP-Host (14) is set to 0xff, the
user is prompted for a host. If Login-IP-Host (14) is set to 0, the user is
connected to the address stored in the Remote Annex port parameter
dedicated_arguments. If the latter method is used, the Login-TCP-Port
(16) attribute is ignored.

Service-Type (6)

Framed-Protocol (7) Login-Service (15) Automatic

Service

Login [1]/Callback [3]

n/a

Telnet [0]

telnet

Login [1]/Callback [3]

n/a

Rlogin [1]

rlogin

Login [1]/Callback [3]

n/a

LAT [4]

connect

Login [1]/Callback [3]

n/a

any except telnet,
rlogin, or LAT

CLI

Framed [2]/Callback [4]

PPP [1]

n/a

ppp

Framed [2]/Callback [4]

SLIP [2]

n/a

slip

Framed [2]/Callback [4]

ARAP [3]

n/a

arap

Administrative [6]

n/a

n/a

CLI super-user

NAS Prompt [7]/Callback [9]

n/a

n/a

CLI

Summary of Contents for 5393







































































Reviews:

No comments