Baxtran IKP15, User Manual, Page: 44 / 49

IKP
model
User’s Guide
ES
FR
ENG
43
5. Calibration by the maximum capacity
DISPLAY DESCRIPTION
g lb
/
1000 Calibr ation unit displayed varies with preset weight unit
XXXXX
6000
Pnt 3
XXXXX
3000
Pnt3
La primera hilera muestra el valor AD, la segunda muestra el valor de la capacidad máxima
(Unidad: gramos o lb/1000), y la tercera muestra el mensaje “Pnt 3”.
Put on poise of full capacity of the scale. When the AD value becomes stable, press . The linearity
calibration is complete.
LOAD CELL CONNECTION (MALE)
Pin setup: 1 (EXC+) 2 (EXC-) 3 (SIG+) 4 (SIG-)
RS232 CONENCTION: DB-09 (MALE)
Pin setup: 2 (TXD) 3 (RXD) 5 (GND) Others (NC)
7. PRINTOUT FORMATS
This section is applicable only for models with RS232C modeule.
1. PRINTING BY PRESSING A KEY
SETTING PRESS M+ PRESS C KEY IN MR MODE
Print
PrESS
COUNTING 1:
---------------------------------------
Net Weight: <Weight format>
Piece Weight: <Weight format3>
Piece Count: <Count format>
...
...
(1) To subtract the result of a single weighing
SUBRACT COUNTING:
--------------------------------------------------------------
Net Weight: <Weight format>
Piece Weight: <Weight format3>
Piece Count: <Count format>
(2) To print the accumulation of weighings
(when the total is on display)
TRANSACTION TOTAL
--------------------------------------------------------------
TOTAL PIECES of 2 COUNTING(S): <Count format>
Print
ALL.1
Print
ALL.2
Print
StAbLE.1
Do not print Do not print
Print
StAbLE.2
Print
oFF
2. PRINT AUTOMATICALLY WHEN THE WEIGHT IS STABLE
SETTING PRINTING WHEN THE WEIGHT IS STABLE
Print
StAbLE.1
Net Weight: <Weight format2>
Print
ALL.1
Piece Weight: <Weight format3>
Piece Count: <Count format>
Print
ALL.2
<Weight format>
Print
StAbLE.2
Print
PrESS
Sin impresión
Print
oFF