Baxtran IKP15, User Manual, Page: 40 / 49

IKP
model
User’s Guide
ES
FR
ENG
39
NPluS
Add
Press to add the weighing result only .
11. MR setting
DISPLAY DESCRIPTION
Nr rEC
LEAuE
Press to show the total weighing result.
Pressing the key again will not clear the total in memory.
Nr rEC
CIEAr
Press to show the total weighing result and press the key again to clear the memory.
Note: When the LP-50 printer is connected to the scale, pressing second
time will clear the memory and print out the total counting result. The serial
connection in CAL 3 should be set to LP-50.
EXTERNAL LOAD CELL
SETTINGS _ CAL 2
Press to browse the menu options. Use the numeric keys to input data and press to save your
settings.
1. Setup B scale capacity
DISPLAY DESCRIPTION
b.LoAd
XXXXXXX
GrAN
Setup the capacity of B scale by gram.
If input 0 here, B scale will be disabled.
2. Setup B scale interval
DISPLAY DESCRIPTION
b.d
=
XXXXX
GrAN
Setup the scale interval (d) of B scale by gram.
Min. d is 1 gram.
Max. d is 65535 gram.
3. Setup B scale stable control level
DISPLAY DESCRIPTION
b.StAbL
X
1-10
Setup the stable control level.
X: stable control level 1-10.
The default stable level is set to 3.
Minimal level is 1, allowing the fastest stabilization time but with slowest noise filter.
Maximum level is 9, allowing best noise filter but with slowest stabilization time.
4. Zero point calibration
DISPLAY DESCRIPTION
XXXXXX
0
b.Pnt.0
The first row shows AD Value, the second row shows “0”, and the third row shows
“b.Pnt.0”
Make sure the weighing pan is empty. When the AD value becomes stable, press .