BAT model
User’s Guide
ES
FR
ENG
31
7. RS.232 OUPUT
The BAT series scales can be ordered with an optional RS-232 output.
Specifications:
• RS-232 output of weighing data
•
ASCII
code
• 9600 Baud
• 8 data bits
• No Parity
Connector: 9 pin d-subminiature socket
• Pin 2: Tx (Output)
• Pin 3: Rx (Input) (not used at this time)
• Pin 5: GND
BAT scales can be connected with PC, remote display or mini printer, setup see section 8.
8. PARAMETERS
The scale has 8 parameters that can be set by the user plus a method of entering the calibration section.
To set parameters press the
key during self checking.
The display will show the first function, “F1 UNIT”.
Pressing the
key will cycle through the other functions.
Pressing
key will allow you to set the function. Use the
key to leave a parameter unchanged.
Note: when display shows “TECH”, press
key to enter, display shows “PIN”, press
,
,
key, and press
key to enter technical parameters setting mode.
