background image

Important! This firefront must be earthed. 

The firefront is supplied with a 3 pin 13 Amp fused re-wireable plug with 1mm²
3 core cable.

The wires in the cable are coloured in accordance with the following code:-
Live =

Brown

Neutral = Blue
Earth = 

Green 

/Yellow

The electric supply must be safely routed from the firefront to an electrical socket.
If the electric cable is damaged, to avoid a hazard it must be replaced by a Valor
Fires authorised service agent, or similarly qualified person

.

All external wiring

between the firefront and the electrical supply shall comply with current IEE
regulations. Extension leads should not be used.

Never connect the boiler and firefront to the same socket / spur. The fuse ratings
are different and subsequent damage may occur.

3. OPTIONAL KITS

Although the firefront is supplied with a 50mm deep spacer frame, an 

optional 50mm

deep spacer frame kit is obtainable either from your firefront supplier or direct from
Valor Fires Sales. The spacer kit is an addition to the spacer supplied with the
firefront. If you want the firefront to be fitted against a flat wall it will be necessary to
purchase two kits, they are designed to be secured together.

Model

Spacer kit number

Lyrica

5135632

Nano

5135632

INSTALLER GUIDE

Page 7

© 

Baxi Heating U.K. Limited 2009.

Contents

Quantity

(Illustrations are not to scale)

Spacer frame

1 only

No 8 x 3/8 Self-

tapping screws

4

Figure 1.

Summary of Contents for VALOR FIRES 845





























Reviews: